HobbyKing
TURNIGY P2627L EDF OUTRUNNER 4200KV FOR 55/64MM
| Specs | Kv- |
| Dimensions | 49 x 26mm |
| Shaft | 3.0mm |
| Voltage | 11.1V |
| Weight | 53g |
| No-load RPM | 45459 |
| Load current | 22.7A |
| Load RPM | 37040 |
| Thrust | 560g |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
| *Note | The motor does not include gold connectors, photo will be updated very soon. |
No-load current:2A,
The first of its kind and the start of many ...5 Reviews
HobbyKing
TURNIGY SERVO 5.5G/0.9KG/.10SEC
| Model | TGY-1550A |
| Speed | 0.10sec |
| Torque | 0.9kg/cm |
| Weight | 5.5g |
| Size | 21x19.6x20.1mm |
Voltage:6v,
Micro analog servo. Precise, jitter free response for small parkflyers ...5 Reviews
HobbyKing
TURNIGY HEAT SHRINK TUBE 50MM YELLOW (1MTR)
| Length | 1meter |
| Diameter | 50mm |
Shrink ratio: 2:1,
Great for protecting battery packs, combining batteries or covering an ...5 Reviews
HobbyKing
TURNIGY 450/500 H2223 BRUSHLESS OUTRUNNER 2900KV
| Model | 2223 |
| Cells | 2~4S |
| No load Current | 2.7A/10V |
| Max power | 600W |
| Weight | 82g |
| Shaft diameter | 3.17mm |
| Dimensions | 27.2 x 42mm |
| Recomended ESC | 2~4S/50A |
Turns: 6, Kv: 2900rpm/V,
This motor is specifically designed for the 450/500 helicopter range ...5 Reviews
HobbyKing
TURNIGY 2211 BRUSHLESS INDOOR MOTOR 2300KV
| Diameter of shaft | 2mm |
| Length of front shaft | 9.8mm |
| Magnet type | 45SH |
| Voltage | 2-3S |
| Prop | EP7x3.5 |
| Thrust | 235g |
| Power | 76W |
Dimension:, 23mm x 24mm, 34mm(with shaft), Weight:, 20g (kv2300) (not including connectors), Lamination thickness: .,
2mm Max performance For 200~300g model airplane (Indoor).5 Reviews
HobbyKing
TURNIGY 480S BL INRUNNER MOTOR W/ IMPELLER 1500KV
| Diameter of shaft | 4mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1500kv |
| Max current | 60A |
| No load current | 0.9A |
| Internal resistance | 49.3ohm |
| Data | 3S 11.1V |
| Prop | APC12x6 |
| Max Current | 11.4A |
| Pull | 610g |
| Prop | APC7x4, APC8x3.8 |
| Max Current | 23.5A, 34A |
| Pull | 1080g, 1300g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 47mm x 30mm, 60mm(with shaft), Weight:, 109g (kv1500) (not including connectors), Lamination thickness: .,
2mm Spec. 4S 14.8V5 Reviews
HobbyKing
TURNIGY BASIC 18A V3.1 SPEED CONTROLLER
| Cont Current | 18A |
| Burst Current | 22A |
| BEC Mode | Linear |
| BEC | 5v / 2A |
| Lipo Cells | 2-4 |
| NiMH | 5-12 |
| Weight | 19g |
| Size | 45x24x11mm |
5 Reviews
HobbyKing
TURNIGY HEAT SHRINK TUBE 100MM BLACK (1MTR)
| Length | 1meter |
| Diameter | 100mm |
Shrink ratio: 2:1,
Great for protecting battery packs, combining batteries or covering an ...5 Reviews
HobbyKing
TURNIGY HEAT SHRINK TUBE 100MM YELLOW (1MTR)
| Length | 1meter |
| Diameter | 100mm |
Shrink ratio: 2:1,
Great for protecting battery packs, combining batteries or covering an ...5 Reviews
HobbyKing
TURNIGY G10 BRUSHLESS OUTRUNNER 1100KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1100kv |
| Max current | 32A |
| No load current | 10V/2.10A |
| Current capacity | 42A/15sec |
| Internal resistance | 0.04 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 68x35mm |
Weight:, 149g (not including connectors),
Designed to be a direct swap out for your 10 ...5 Reviews
HobbyKing
TURNIGY 4MM AQUAPROP 38X30X16MM.
| Size | 38x30x16mm. |
| Length | 38mm |
| Diameter | 16mm |
| Shaft Size | 4mm |
Pitch : 30,
5 Reviews
HobbyKing
TURNIGY 2209 28TURN 1050KV 15A OUTRUNNER
| Operating Current | 4A ~ 12A |
| Peak Current | 15A |
| Suggested prop | 9x4.7 |
| Suggested Battery | 1300~1700mAh 3S1P |
| Weight | 46g |
| Dimensions | 27.6 x 28mm |
| Shaft Size | 3.175mm |
Kv: 1050rpm/v,
Spec. Kit includes full accessories, including gold bullet connectors, prop ...5 Reviews
HobbyKing
TURNIGY 1440A SERVO 4.4G/0.8KG/.10SEC (V2)
| Model | TGY-1440A |
| Voltage | 3.7~6v |
| Speed @ 4.8V | 0.12sec |
| Speed @ 6.0V | 0.10sec |
| Torque @ 4.8V | 0.6kg/cm |
| Torque @ 6.0V | 0.8kg/cm |
| Weight | 4.4g |
| Size | 20x19.6x8.0mm |
5 Reviews
HobbyKing
TURNIGY V-TAIL MIXER. ULTRA-SMALL
| Size | 31x8x7mm |
| Weight | 4g (with wires!) |
| Mixing Rate | 1x1 Fixed |
| Precision | 200 steps |
5 Reviews
HobbyKing
TURNIGY 3 CHANNEL SERVO SPEED/DIRECTION REGULATOR
: 3g, : 1 servo Channel., : 3 Channels., : Travel Speed & Travel Time in both directions.,
A fully adjustable 3 channel-out Servo Regulator which can be ...5 Reviews